- Drill a hole into the masonry. To install soft material, such as wood, drill through both material simultaneously. Drill the hole 1/4" deeper than the recommended embedment (click on ''Technical Specifications'' for appropriate drill sizes).
- Clean the hole using a dust blower or compressed air. The hole must be free of residual dust and debris. A cleaner hole will directly improve the performance of the anchor.
- Insert the Drive Nail Anchor through the object you need to affix and into the hole.
- With a hammer, hit the nail until the anchor is set tightly against the item to be fastened.
Do not over-drive the nail into the body as this could damage the anchor.