PRODUCTS

Machine Screws and Accessories

The machine screw anchor works well in brick as well as in concrete of various compression strengths (psi). The screw can be easily removed, or loosened and retightened. It is vibration resistant and adapts well to variations in hole sizes. Available sizes range from #6-32 UNC to 1/2"-13 UNC. The use of a setting tool is required for installation and is sold separately.
Features and benefits
  • Installs flush to surface
  • Use with machine screws or threaded rods
  • Strong holding power
  • Screw could be removed and reinstalled
  • Weathering resistance
View all selection
Warning
This product can expose you to chemicals including nickel, lead, which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
Installation Tools
Drill Hammer
Mounting Surface
Brick Concrete
SKUDescription Anchors Per Pack Drill size DRILL BIT Per Pack Packaging
280CMACHINE SCREW ANCHORS #6 -32 UNC (X100) 100 5/16" + 1 TOOL MACHINE SCREW ANCHORS #6 -32 UNC (X100)
281CMACHINE SCREW ANCHORS #8 -32 UNC (X100) 100 5/16" + 1 TOOL MACHINE SCREW ANCHORS #8 -32 UNC (X100)
282CMACHINE SCREW ANCHORS #10 -24 UNC (X100) 100 3/8" + 1 TOOL MACHINE SCREW ANCHORS #10 -24 UNC (X100)
283CMACHINE SCREW ANCHORS 1/4" -20 UNC (X100) 100 + 1 TOOL MACHINE SCREW ANCHORS 1/4" -20 UNC (X100)
284CMACHINE SCREW ANCHORS 5/16" -18 UNC (X100) 100 5/8" + 1 TOOL MACHINE SCREW ANCHORS 5/16" -18 UNC (X100)
285CMACHINE SCREW ANCHORS 3/8" -16 UNC (X50) 50 3/4" + 1 TOOL MACHINE SCREW ANCHORS 3/8" -16 UNC (X50)
286CMACHINE SCREW ANCHORS 1/2" -13 UNC (X50) 50 7/8" + 1 TOOL MACHINE SCREW ANCHORS 1/2" -13 UNC (X50)
287UMACHINE SCREWS SETTING TOLLS #10 -24 UNC (X1) 1 MACHINE SCREWS SETTING TOLLS #10 -24 UNC (X1)
288UMACHINE SCREW SETTING TOLLS 1/4" -20 UNC (X1) 1 MACHINE SCREW SETTING TOLLS 1/4" -20 UNC (X1)
289UMACHINE SCREW SETTING TOOLS 3/8" -16 UNC (X1) 1 MACHINE SCREW SETTING TOOLS 3/8" -16 UNC (X1)