Masonry Anchors

Supersleeve

Starting at CA$0.00

The SuperSleeve™ is a great heavy-duty anchor. It is unique and so practical, the bolt can easily be removed and reinstalled and it as a low profile head. The torque controlled expansion begins at the bottom of the anchor and allows for a quick installation. Available sizes range from 3/8" x 2" to 1/2" x 3-3/4”.
Features and benefits
  • Grade 5 steel bolt increases shear load by 30%
  • Practical and unique, can easily be removed or reinstalled
  • Torque controlled expansion for quick setting
  • Safer low profile head
  • The expansion begins at the bottom of the anchor for a quick installation
View all selection
Installation Tools
Drill Wrench
Mounting Surface
Brick Concrete Hollow-block
Applications
  • Awnings
  • Heat pumps
  • Mounted hose reels
  • Satellite dishes
  • Thermo pumps
Installation Guide
1. Drill the appropriate size hole into the base material (click on ''Technical Specifications'' for appropriate drill sizes.) Always drill 1/4 inch longer than required.
2. Clean hole using a dust blower or compressed air.
3. Insert the SuperSleeve™ through the object you need to affix and insert into the drilled hole. You may need to tap the anchor in using a hammer.
4. Hand tighten, then using a wrench, turn clockwise until there is a strong resistance (3 to 5 turns will fully set the anchor).
Technical Specifications
SKUDescription Anchors Per Pack Safe Load Weight (Ibs) Drill size Min embedment DRILL BIT Per Pack Packaging
603RSUPERSLEEVE - HEX BOLTS 3/8" X 2" (+ DRILL BIT) (X4) 4 750 3/8" 2" 1 SUPERSLEEVE - HEX BOLTS 3/8" X 2" (+ DRILL BIT) (X4)
603CSUPERSLEEVE - HEX BOLTS 3/8" X 2" (X50) 50 750 3/8" 2" SUPERSLEEVE - HEX BOLTS 3/8" X 2" (X50)
607RSUPERSLEEVE - HEX BOLTS 3/8" X 3" (+ DRILL BIT) (X4) 4 750 3/8" 2" 1 SUPERSLEEVE - HEX BOLTS 3/8" X 3" (+ DRILL BIT) (X4)
607CSUPERSLEEVE - HEX BOLTS 3/8" X 3" (X50) 50 750 3/8" 2" SUPERSLEEVE - HEX BOLTS 3/8" X 3" (X50)
609CSUPERSLEEVE - HEX BOLTS 3/8" X 4" (X25) 25 750 3/8" 2" SUPERSLEEVE - HEX BOLTS 3/8" X 4" (X25)
609RSUPERSLEEVE - HEX BOLTS 3/8" X 4" (+ DRILL BIT) (X4) 4 750 3/8" 2" 1 SUPERSLEEVE - HEX BOLTS 3/8" X 4" (+ DRILL BIT) (X4)
617RSUPERSLEEVE - HEX BOLTS 1/2" X 2 3/4" (+ DRILL BIT) (X4) 4 1525 2-3/4" 1 SUPERSLEEVE - HEX BOLTS 1/2" X 2 3/4" (+ DRILL BIT) (X4)
617CSUPERSLEEVE - HEX BOLTS 1/2" X 2 3/4" (X25) 25 1525 2-3/4" SUPERSLEEVE - HEX BOLTS 1/2" X 2 3/4" (X25)
619RSUPERSLEEVE - HEX BOLTS 1/2" X 3 3/4" (+ DRILL BIT) (X4) 4 1525 2-3/4" 1 SUPERSLEEVE - HEX BOLTS 1/2" X 3 3/4" (+ DRILL BIT) (X4)
619CSUPERSLEEVE - HEX BOLTS 1/2" X 3 3/4" (X25) 25 1525 2-3/4" SUPERSLEEVE - HEX BOLTS 1/2" X 3 3/4" (X25)